Moving Your own Pinball Machine.

Among the responsibilities involved with buying a new pinball machine is knowing the manner in which you is likely to be transporting it without damaging it. If you’re planning to be spending a good wad of cash to get a pinball machine, it’s recommended to learn to move it from point A to point B and still keep it in the exact same condition it absolutely was when it started its journey.

Firstly, and possibly most obviously, you’re planning to need a vehicle that’s big enough to hold it. It can be a van, truck, or trailer but it’s planning to need space to hold a device that, when folded down will measure 76cm wide, 76cm tall and 140cm deep.

Never make an effort to transport a pinball machine in its fully assembled configuration – like that lies heartbreak all round.

Before attempting to place the pinball machine in your car or truck, you first need to fold down the headboard. Arcade games for sale Most of the recently manufactured pinball machines and by that I’m talking about the ones that were made from around 1980 onwards, are created with hinges to allow the headboard to be folded. Otherwise, your pinball machine may have a headboard that’s bolted into place.

To access the bolts on an older pinball machine you must remove the backing panel. When you undo the bolts you’ll also need to unplug the connectors that rundown in to the box. If you’re worried about remembering where these connectors go, it could be recommended to label them.

Once the headboard has been folded on top of the machine, you must remove the pinball machine legs. While removing the legs, ensure you observe leading legs and back legs in order to avoid confusion when reattaching them when you have reached your destination. With some makes of pinball machine, the legs would be the same length front and back which makes it difficult to tell them apart. Others, such as Sega pinball machines, the legs are longer at the rear than the front – easier to tell which goes where.

Ensure you have removed the balls from the machine, you do not want them bouncing around everywhere in transit. Also, make certain the coin return door has been secured if you’d opened it while undoing the legs.

Loading the pinball machine into a vehicle is really a two-person job. Simply load one end (front first usually works best) onto the tray and then slide it in. Because you’ve folded the headboard down it will likely be lying through to leading end of the table. Loading the pinball machine front first will put the heavy end closest to the vehicle’s cabin and will prevent nearly all potential movement. Make certain the machine is securely tied down with straps and you’re in your way.

When you’ve attained your destination, it is usually recommended to slide the machine halfway out of your vehicle, attaching the legs to one end before sliding it out the remaining way and attaching one other legs. Once the pinball machine is in place, reassemble the headboard and you’re ready to savor your brand-new pinball machine.

Leave a comment

Your email address will not be published. Required fields are marked *